The new Standard in light, reliable inflation!
Prestaflator Micro is a superlight CO2 inflation head and more! We’ve combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control!
The Cartridge is the flow control Knob
The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it’s revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design.
Secure, no-loss connection.
Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don’t loose any CO2. 100% of the cartridge contents will go towards inflation
You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge.
To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time.
Bryan (verified owner) –
A CO2 inflation is something you have to be able to trust. I was hoping the need to use this would not arise, but it did. The inflator worked very well. I can offer one a little advice on how to use this product. First loosely thread the cartridge to the inflator. Next thread the inflator onto the valve stem (in my case a presta valve). Fully screw in the cartridge. I had to back off the cartridge to get the CO2 to flow. As the ad for the item states the inflator controls the amount of CO2. When you have the tire inflated to where you want, remove the inflator from the valve. I unscrewed the cartridge first and I started to lose air until I took the inflator off the valve. The inflator comes with an insulated sleeve which will be nice as I just bought more 25-gram cartridges and they have no insulation on them. Very well made and finished.