$39.95
includes:(head on hose fits Schrader)
![]() |
Prestacycle products are sold and serviced through our Dealer Network of Local Bike Shops. You bike shop can provide you the best options for sales, service and instruction of Prestacycle products. If your LBS doesn't carry Prestacycle products yet, tell them about us! - If you don't have a local dealer, on-line purchasing is available below.
Prestaratchet Tool for use with bit heads. Reverseable ratchet with thumb wheel. Mini hand ratchet is smaller than HEX keys and TORX® keys - fits anywhere and eliminates in-out-in-out wrenching.
Hardened tool grade steel with a polished finish and comfort grip handle. Compact size - just over 4 inches long - and only 28 grams weight. Buy more wrenches and leave your common size heads in each wrench. Then each wrench is ready to use without changing bits.
Set includes all the heads needed for virtually any work on bikes. Covers all major HEX sizes, all the new TORX® sizes found on the latest components, and even includes long heads for different brands of road bike levers. Also perfect for most brands of torque wrenches with the optional adapter below.
Includes: HEX: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm TORX®: T6, T8, T10, T15, T20,T25, T30 SCREWDRIVERS: PH0, PH1, PH2 1/8 flat, 3/16 flat LONG ARM: 5mm hex ball head, 4mm hex ball head, T25 TORX® 1/4 socket adapter, 100mm magnetic bit extension.
Fits all 1/4" socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Our bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles.
Using bits allows you to perform intial installation with our reverseable mini ratchet - then leave the bit inside the job - remove the mini ratchet - and connect your torque wrench onto the bit to finish final tightening.
Quick-clip design for frequent Schrader use. Our oversized spring stands-up to high bicycle pressure for a good seal and safety. The compact angle head goes where even floor pump heads can't reach, like kids bikes and small scooter tires!
Made with 6061-T6 Alloy - it's as strong as Brass and only 1/3 the weight. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy - it's as strong as Brass and only 1/3 the weight.
Note: The safety feature is only functional when the tip is used on a Prestaflator.
For Disc wheels with Presta valves, a right-angle arm makes it easy to access tight places. Stays on at high pressure better than others. It's also compatible with Silca Pumps and can be adapted to other pump brands with our optional Schrader barb. Note: We recommend our standard head for everyday bike wheels. Made with 6061-T6 Alloy - it's as strong as Brass and only 1/3 the weight. Uses industry standard 24.1 pump head washer (available in our kit below). Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
Upgrade your heavy Brass or Steel couplers. Made with 6061-T6 Alloy - it's as strong as Brass and only 1/3 the weight. Lighten the tool in your hand right down to the hose. Less weight means you can focus more energy on your work.
I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. Kit includes coupler, three male plugs and one female plug. CNC machined with stainless steel bearings and a nice polished finish.
Stand outside the wheel and PULL on / PUSH off - the fastest way to get you going. EZ-Grip head with no moving parts for durability and long life without corrosion. It's also compatible with Silca Pumps and can be adapted to other pump brands with our optional Schrader barb.
Made with 6061-T6 Alloy - it's as strong as Brass and only 1/3 the weight. Uses industry standard 24.1 pump head washer (available in our kit below). Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
Upgrade your older brass head to EZ-Grip. Makes it much easier and safer for quick PULL on / PUSH off use. Also great for repairing plastic Silca pump heads. Just keep the good parts from your old head and throw away the plastic.
Note: Screw cap and rubber grommet are not included. If you need these parts you should buy the complete replacement Presta head shown above.
Use it to upgrade your floor pump to Prestaflator heads and accessories. Made with 6061-T6 Alloy - it's as strong as Brass and only 1/3 the weight.
Standard barb fits 1/4" inner diameter hose.
Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump's hose.
Get a fresh seal in your Prestaflator or pump head, or renew all the seals in your Prestaflator tool.
Includes our improved 24.1 compatible pump head washer. We use a softer rubber. It's easier to get on and off, provides a better seal and lasts longer because it flexes instead of flaking-off onto your valve.
Kit also includes three (3) #7 o-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. These o-rings fit the hose and other removable connectors on a Prestaflator tool.
Upgrade or replace your hose! Our hose uses the latest technology: Braid-Reinforced Polyurethane. Superior to Rubber or PVC, it's more flexible, non-marring, and is resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -90° to +175°F.
The gloss black finish conceals dirt, grime and grease and will simply wipe clean. Fits all previous Prestaflator tools, o-ring included. Note: Will only fit Prestaflator tools.
Gauge & body sold only as a unit to insure correct gauge calibration. The gauge's steel housing underneath the rubber shock guard makes our tool shop-grade tough.
This item is primarily offered to allow users to custom configure a Prestaflator with one of our optional heads.
Just purchase this body & gauge, plus a hose, and the head of your choice.
Thank You from a repeat customer! They work great and make great gifts!
~ Devon Reiss